All 145 Addmore products with catalogue codes and list prices. Open any product for its description, uses, finishes and technical drawing.
A floor spring is a hydraulic door closer set into the floor under a frameless glass door. It carries the full weight of the door on a spindle, swings it both ways, and brings it back to the centre at a controlled speed. Because it is hidden in the floor, the glass door stays completely clean-looking. Black · Rose Gold · Gold available
Heavy-duty double spring floor hinge with Addmore Super Spring. Carries glass doors up to 120 kg and 1200 mm wide, holds open at 90° and 120°, and is cycle-tested to 10 lakh openings. The right choice for busy entrances.
Double spring floor hinge for doors up to 100 kg and 1100 mm wide. Tested to 5 lakh cycles. A strong all-rounder for office and shop doors.
Single spring floor hinge for lighter glass doors up to 80 kg and 900 mm wide. Tested to 3 lakh cycles, ideal for cabins and internal doors.
A hydraulic closer built into the bottom patch, so no floor digging is needed. Holds doors up to 90 kg and 1000 mm wide. Perfect for finished floors and renovations.
Door closers pull a door shut automatically after it is opened, so it never stays open by accident and never slams. Addmore offers surface-mounted closers for framed doors and concealed closers that hide inside the door or frame.
Classic surface-mounted overhead door closer with scissor arm. ADC-01 for doors up to 60 kg, ADC-02 for up to 120 kg.
Slim surface closer with slide (pelmet) arm and hold-open at 90°, in black. Clean look on modern doors.
Slim surface closer with slide (pelmet) arm and hold-open at 90°, in silver.
Concealed door closer hidden in the door and frame head. Takes doors up to 80 kg with no visible arm.
Heavy concealed door closer for doors up to 150 kg. Invisible when the door is closed.
Mounting saddle that lets a pelmet-arm closer be fixed on a glass door or pelmet.
Patch fittings are the clamps that hold a frameless toughened glass door and its side or top panels. They grip the glass between two plates with rubber gaskets, so the glass needs only a corner cut-out and no full frame. Black · Rose Gold · Gold available
Bottom door patch that clamps the lower corner of a glass door and connects it to the floor spring.
Top door patch that clamps the upper corner of a glass door and turns on the top pivot.
Over-panel patch with pivot, fixed to the wall or soffit where the door has a top glass panel.
Big L patch with pivot. Connects the door, the glass over-panel and the side panel at one corner.
Small L patch joining the over-panel to a side panel, without pivot.
Top pivot that fixes to the ceiling or frame and holds the top patch of the door.
Patch lock for the bottom or centre of a glass door, with keys. Locks into the floor or a strike box.
Strike box that receives the APF-07 lock bolt on the fixed glass panel.
Joins two glass panels and fixes them to the wall or ceiling.
Mini floor hinge for light glass doors where a full floor spring is not needed.
Top and bottom pivot set so wooden or aluminium doors can run on a floor spring.
A combo door set gives you every fitting needed for one frameless glass door in a single order, matched to one floor spring. It saves time on site and avoids missing parts.
Complete set for one door with the AFS-6600 floor hinge (80 kg doors).
Complete set for one door with the AFS-8400 floor hinge (100 kg doors).
Complete set for one door with the AFS-9400 Super Spring floor hinge (120 kg doors).
Glass connectors (also called glass clamps) join fixed glass panels to each other or to a wall at a set angle. They are the small square clamps you see on shower enclosures, glass partitions and display units. Black · Rose Gold · Gold available
Joins two glass panels at 135°, for angled and bay-shaped enclosures.
Shower hinges carry a frameless glass shower door and let it swing. Addmore hinges are SS 304 with self-centering action, made for wet areas. Black · Rose Gold · Gold available
Fixed wall bracket at 90° for holding a fixed glass panel to the wall.
Wall-to-glass hinge with offset back plate, for 90° door swing from a wall.
Glass-to-glass hinge for a door hung off a fixed panel in a straight line.
Glass-to-glass hinge for a door hung off a fixed panel at a 90° corner.
T-type hinge for two doors at 180° plus a fixed panel at 90°, all at one point.
A towel bar handle is a long pull handle on the outside of a shower door with a towel bar on the inside. It gives a good grip on wet glass and a place to hang a towel. Black · Rose Gold · Gold available
Round towel-bar handle for shower doors. Pull handle outside, towel bar inside.
Square towel-bar handle for shower doors with a modern square profile.
Shower header accessories make a 19 mm stabiliser rod between the top of a glass panel and the wall. The rod stops a tall fixed glass panel from flexing. Black · Rose Gold · Gold available
Holds the rod end at the glass with one closed side for a neat finish.
Swivel connector joining two rods at any angle.
A back-to-back knob for glass shower and cabinet doors. Compact and easy to grip from both sides.
PVC and magnetic seals close the gaps around frameless shower glass. They keep water in the shower and stop doors from rattling. Black · Rose Gold · Gold available
Y seal with soft and hard fins, sweeps water at the door bottom.
Water dispersal seal with a drip lip that keeps water inside the shower.
The pipe sliding system uses a 10×30 mm stainless track with exposed rollers. It is a stylish, visible sliding system for glass doors.
Complete pipe sliding set with rollers, holders, stoppers, floor guide, 50 mm handle and 2 m track.
90° track connector for L-shaped pipe sliding systems.
A complete sliding shower kit with a 2 m aluminium top track, knob clamp rollers and all accessories in one box.
Complete shower sliding kit with 2 m aluminium track.
Top-hung sliding systems with coin-style glass clamps. The track carries the door weight, so the glass slides smoothly with no bottom track.
Small coin sliding system with grip, for glass doors up to 80 kg.
Big coin sliding system with grip, for glass doors up to 100 kg.
12 ft track with grip for one sliding glass door.
12 ft track for one fixed panel and one sliding door.
12 ft double track for two sliding glass doors.
Premium sliding rollers with stainless coin covers, running in the AST 44 aluminium track. Quiet and smooth for glass doors up to 80 kg. Black · Rose Gold · Gold available
Teflon-body roller for quiet running, doors up to 80 kg.
Aluminium track for single sliding glass door, sold per foot.
Aluminium track for 1 fixed + 1 sliding door, sold per foot.
Aluminium track for two sliding doors, sold per foot.
The small parts that finish a sliding glass door: flush handles, floor guides, track holders and stoppers.
Rectangle flush handle, 133 mm hole to hole, SS 304.
SS 304 floor guide that keeps a sliding glass door in line.
Locks that clamp directly onto toughened glass, for swing and sliding doors. Most models need no cut-out in the glass.
Double door lock with strike box. Key on one side, knob on the other. No glass cut-out.
Single door lock with strike plate to the wall. Key one side, knob the other. No cut-out.
Compact glass-to-glass lock with knob, for cabins and toilets.
Glass-to-glass lock with Open/Closed indicator, for washrooms.
Sliding door lock with strike plate for door to wall.
Sliding door lock with strike box for double sliding doors.
Sliding door lock with built-in sliding handle, to wall.
Sliding door lock with built-in handle for double sliding doors.
D-type lock with strike plate for aluminium office partition doors, satin finish.
D-type lock with strike plate for aluminium office partition doors, black matt.
Pull handles for glass and wooden doors, in H, D and offset shapes, SS 202 and SS 304, plain or two-tone. Black · Rose Gold · Gold available
H-type two-tone pull handle in 32 mm tube, in SS 202 and SS 304, three lengths.
Offset (double D bend) handle in full matt or black matt.
1500 mm round pull handle with built-in lock, for main glass entrance doors.
Spider fittings carry large structural glass walls (curtain walls and facades) at the corners of each glass panel. Fin type spiders clamp onto a glass fin that acts as the support beam.
Spider fittings without fin connect to a steel structure, wall or beam instead of a glass fin. 220 mm arm distance (155 mm on one-way).
Routels are the bolts that hold drilled glass to spider fittings. They spread the load on the glass and allow small movement.
MS connector that joins a without-fin spider to a wall or beam.
Fin plates join a glass fin to the facade structure; splice plates join two glass fins end to end to make longer fins.
Canopy fittings hold a glass canopy above an entrance with stainless rods or wire rope. SS 316 for outdoor use.
Small hinges for light glass doors and office partition doors.
Mini glass-to-glass hinge without spring, 6–8 mm glass.
Mini wall-to-glass hinge without spring, 6–8 mm glass.
Aluminium hinge for office partition doors, silver anodized.
Aluminium hinge for office partition doors, black matt.
An aluminium male-female section that holds glass panels for partitions without visible clamps. Black · Rose Gold · Gold available
Male-female aluminium glazing profile for partitions, per running foot.
Spigots, holders and handrail connectors for frameless glass railings on balconies, stairs and terraces. SS 304.
38 mm glass holder (standoff) for fixing glass to the slab edge.
Tools and hinges used by glass installers.
Tapes used for glass, mirror and window installation work.
Bearings and weather strips for aluminium sliding windows.
Add products to your enquiry list and send it to us. Our team confirms stock, finish, best price and delivery time for your city.
